Головна » Обладнання виробництва полімерів » Видувна екструзія (плівка)

Видувна екструзія (плівка)

3.20" Extruder, 8" Rotating Spiral Groove Die Russi Motoriduttori Blown Film Line

Код #ZP60646

3.20" Extruder, 8" Rotating Spiral Groove Die Russi Motoriduttori Blown Film Line

Код #ZP60646

Used Russi Motoriduttori 40" wide (1000mm) blown film line, new 2010. Line is equipped with the following: 80mm extruder, 28/1 L/D driven by a 37 kW motor. Includes 200mm rotating spiral groove die (approximately 8") with head thickness control system and automatic gap adjustment. Includes rotating take off, Corona treater, automatic 1100mm (approximately 44") rewinder with surface and center assist capability. Line last ran a 120-150kg per hour. Still installed and can be seen in operation.

Місцезнаходження: Southern Europe

У кошик Детальніше

3.0" Ext Macchi 3-Layer Blown Film Line Maximum 2350mm Lay Flat Sheeting

Код #ZP62698

3.0" Ext Macchi 3-Layer Blown Film Line Maximum 2350mm Lay Flat Sheeting

Код #ZP62698

Used 2009 Macchi 3-layer blown film line still installed and currently in operation. Line previously utilized on LDPE/LLDPE/HDPE. Maximum 2350mm lay flat sheeting. Line consists of the following: (2) 65mm 30/1 L/D extruders each with Servo motors (1) 80mm 30/1 L/D extruder with Servo motor Each extruder is equipped with hydraulic screen changer Oscillating nip roll assembly Martignoni treater (2) blown film dies available, 350mm O.D. and 400mm O.D. with 1.8mm die gap Piovan gravimetric blending system with 4-component capability. No cooling tower included. Includes back-to-back double winders for approximately 30" O.D. rolls Includes Auto Gauge control system from K-Design Germany Fully automatic IBC cooling system Carbon fiber dual lip air ring included with dies

Місцезнаходження: South Africa

У кошик Детальніше

2.95" Extruder, 500mm Die Barmag Type BF 4/5 5-Layer Co-extrusion Line

Код #ZP61729

2.95" Extruder, 500mm Die Barmag Type BF 4/5 5-Layer Co-extrusion Line

Код #ZP61729

Used Barmag type BF 4/5 5-layer co-extrusion line, new 1988 overhauled 2011. Line capacity reported 200 kg per hour on LDPE, LLDPE, MLLDPE, PP, PA. Includes (4) extruders, 75mm (2), 60mm and 45mm. Includes 500mm die with 1.2mm die gap. Reported last used on 1700mm film width and includes Corona treater and back to back winders.

Місцезнаходження: UKRAINE

У кошик Детальніше

2.50" Extruder, 10" Rotating Die Gloenco Blown Film Line

Код #ZP54640-1

2.50" Extruder, 10" Rotating Die Gloenco Blown Film Line

Код #ZP54640-1

Used Gloenco 60" wide blown film line consisting of the following. 2.5" Gloenco (Gloucester) 24/1 L/D extruder with 87.5 HP DC drive. Extruder has water cooled feed throat, includes hopper, has 10" rotating die with air ring. Includes 60" wide nip roll assembly, and 2-position surface winder. New 1972.

Місцезнаходження: Northeast USA

У кошик Детальніше

2.75" Extruder, 6" Die Reifenhauser HDPE Blow Film Line

Код #ZP62201

2.75" Extruder, 6" Die Reifenhauser HDPE Blow Film Line

Код #ZP62201

Used Reifenhauser HDPE blow film line model RT381-1-70. New 1982. Extruder is driven by a 45 kW motor, 18/1 L/D. Has water cooled feed throat. Nip roll is mounted in a 27' tall tower, 55" in width. Has 150mm O.D. Blown film die (6") with single lip air ring. Equipped with Kuhne surface winder 43" in width with maximum 40" diameter rolls. Winder is new 1987. Previously run on 10-35 Micron film at 70 kg per hour.

Місцезнаходження: EUROPE

У кошик Детальніше

3.54" (2200mm) Extruder, 400mm Ibanez Blown Film Line

Код #ZP57831

3.54" (2200mm) Extruder, 400mm Ibanez Blown Film Line

Код #ZP57831

Used 2200mm Ibanez blown film line new in 1998 consisting of the following: Ibanez 90mm 24/1 L/D air cooled extruder driven by 150 HP motor. Includes (1) 400mm and (1) 250mm dies with air ring and rotating cart, adjustable bubble cage, 2200mm wide primary nips with collapsing frame, and 2 position surface winder. Line previously running LDPE. Has only 1 year of use. Presently installed as operated.

Місцезнаходження: Mexico

У кошик Детальніше

Keifel Lowboy Extrusion Blown Film Line, Mdl CA4 40mm 24:1 L/D

Код #21571

Keifel Lowboy Extrusion Blown Film Line, Mdl CA4 40mm 24:1 L/D

Код #21571

Keifel model CA4 40mm 24:1 L/D lowboy extrusion blown film line consisting of: A) Extruder having an electrically heated, air-cooled barrel. A second complete barrel, screw, and heaters are included to convert the machine to a 30:1 L/D ratio. Gearbox is belt driven by a 30 HP Reliance D/C motor with SCR control. Includes hopper, water cooled gearbox, grooved feed throat, and operator control panel with seven (7) zones of temperature control. Instrumentation includes controllers for (4) barrel zones, (3) die zones, blower control, speed control dial, and gauges for extruder Amps, RPM, pressure, and melt temperature. S/N 0205. Manufactured in 1989. Very clean. 460/3/60 input power. B) 3" stationary blown film die less air ring. Includes 6.1 Kw air ring blower with 4 port plenum. C) 38" Kiefel Model FW 811 single position surface winder for 36" diameter rolls. Includes winder operator control panel with preset footage counter, auto fly knife, auto transfer, second pull roll assembly, and two winding shafts. Serial No. 0141. 460/3/60 input power. Very Clean.

Місцезнаходження: Midwest USA

У кошик Детальніше